Supermicro SuperBlade SBI-7125W-S6, User Manual

Page: 72 / 94

SBI-7125W-S6 Blade Module User’s Manual
6-8
Table 6-6. PCI Configuration Submenu Menu Options
Menu Option Description
Onboard GLAN1/
Onboard GLAN2
(Gigabit- LAN)
OPROM Configure
Enabling this option provides the capability to boot from an Ethernet port. The
options are
Enabled and Disabled.
Default Primary Video
Adapter
Choose the default video adapter. The options are Onboard and Other.
Emulated IRQ
Solution
Choose the emulated IRQ solution. The options are Enabled and Disabled .
PCI-E I/O
Performance Choose between Payload 256B (with coalesce disabled) and Coalesce (with a
payload size of 128 bytes).
PCI Parity Error
Forwarding Enabling logs PCI SERR/PERR error events in BIOS and IPMI. The options are
Enabled and
Disabled .
ROM Scan Ordering
Determines what kind of option ROM activates first. The options are Onboard
First and Addon First.
PCI Fast Delayed
Transaction Enabling improves heavy DMA transfer for 32-bit PCI multimedia cards. The
options are Enabled and
Disabled .
Reset Configuration
Data If set to Yes, this setting clears the Extended System Configuration Data (ESCD)
area. The options are
Yes and No.
Large Disk Access
Mode This setting determines how large hard drives are to be accessed. The options
are
DOS or Other (for Unix, Novelle NetWare and other operating systems).
Table 6-7. Advanced Chipset Control Submenu Menu Options
Menu Option Description
SERR Signal
Condition This setting specifies the ECC Error conditions that an SERR# is to be asserted.
The options are None,
Single Bit , Multiple Bit and Both.
4GB PCI Hole
Granularity
This feature allows you to select the granularity of PCI hole for PCI slots. If
MTRRs are not enough, this option may be used to reduce MTRR occupation.
The options are
256 MB , 512 MB, 1GB and 2GB.
Memory Branch
Mode
This option allows the BIOS to enumerate Host Mode for Device 16, Function 1,
Reg. 40h bit 16 and Reg. 58h [14]. The options are
Interleave , Sequential,
Mirror and Single Channel 0.
Branch 0 Rank
Interleave
Selects the Branch 0 rank interleave. The options are 1:1, 2:1 and 4:1 .
Branch 0 Rank
Sparing Enable to enable the sparing feature for Branch 0 Rank. The options are
Enabled and
Disabled .
Branch 1 Rank
Interleave
Selects the Branch 1 rank interleave. The options are 1:1, 2:1 and 4:1 .
Branch 1 Rank
Sparing Enable to enable the sparing feature for Branch 1 Rank. The options are
Enabled and
Disabled .
Enhanced x8
Detection Select enabled to enable Enhanced x8 DRAM UC Error Detection. The options
are
Enabled and Disabled.