Supermicro FatTwin F628G3-FT+, User Manual

Page: 120 / 160

7-14
FatTwin F628G3-FT+/FTPT+ User's Manual
Fatal Err (Error) Over
Select Enable to force fatal error prorogation to the IIO core error logic
for the port specifi ed by the user. The options are Disable and Enable.
Non-Fatal Err (Error) Over
Select Enable to force non-fatal error prorogation to the IIO core error logic
for the port specifi ed by the user. The options are Disable and Enable.
Corr Err (Correctable Error) Over
Select Enable to force correctable error prorogation to the IIIO core error
logic for the port specifi ed by the user. The options are Disable and Enable.
L0s Support
When this item is set to Disable, IIO will not put its transmitter in the L0s
state. The default setting is Disable .
PM ACPI Support
Select Enable to generate an _HPGPE message on a PM ACPI event.
Select Disable to generate an MSI message. The options are Disable
and Enable.
Gen3 (Generation 3) Eq (Equalization) Mode
Use this item to set the "Adaptive Equalization" mode for PCI-E Generation
3 devices. The options are Auto , Enable Phase 0, 1, 2, 3; Disable Phase
0, 1, 2, 3; Enable Phase 1 Only, Enable Phase 0, 1 Only, Enable MMM
Offset West, and Advanced.
Gen3 (Generation 3) Spec (Specifi cs) Mode
Use this item to set the Specifi cs mode for PCI-E Generation 3 devices.
The options are Auto , 0.70 July, 0.70 Sept and 071 Sept.
Gen3 (Generation 3) Phase2 Mode
Use this item to set the PCI-E Generation 3 Phase 2 mode. The options
are Hardware Adaptive and Manual.
Gen3 (Generation 3) DN TX Preset
Use this item to set the Preset mode for PCI-E Gen3 downstream
transmitting (TX) from the master device to a slave device. The options
are Auto , P0 (-6.0/0.0 dB), P1 (-3.5/0.0 dB), P2 (-4.5/0.0 dB), P3 (-2.5/0.0
dB), P4 (0.0/0.0 dB), P5 (0.0/2.0 dB), P6 (0.0/2.5 dB), P7 (-6.0 /3.5 dB),
P8 (-3.5/3.5 dB), and P9 (0.0/3.5 dB).