6-4
FatTwin F628G3-FT+/FTPT+ User's Manual
6-5 Installing and Removing Hard Drives
The F424AG chassis contains individual motherboards in separate 2U nodes. Each
serverboard node controls the hard drives contained within that node. Note that if a
serverboard node is pulled out of the chassis, the hard drives associated with that
node will power down as well. Refer to the charts below and on the following pages
for your specifi c chassis confi guration. These instructions apply to hot-swappable
hard drives in both 2.5" and 3.5" sizes.
Only enterprise level hard drives are recommended for use in Supermicro chassis.
F424AG-R2K04BP
Node 2
Controls two 3.5" HDDs, B1-B2
Node 4
Controls two 3.5" HDDs, D1-D2
Node 1
Controls two 3.5" HDDs, A1-A2
Node 3
Controls two 3.5" HDDs, C1-C2
Figure 6-2: Node Locations
Node 2
Node 4
Node 1
Node 3
Summary of Contents for FatTwin F628G3-FT+
