Supermicro FatTwin F628G3-FT+, User Manual

Page: 70 / 160

5-16
FatTwin F628G3-FT+/FTPT+ User's Manual
Video Connector
A Video (VGA) connector is located next to LAN2 on the IO panel. This connector
provides video and CRT display. Refer to the board layout below for the location.
Ethernet Ports
Two Ethernet ports (LAN1/2) are located on the I/O panel on the serverboard. These
two LAN ports support 1GigE LAN (F628G3-FT+) or 10GBase-T (F628G3-FTPT+)
LAN connections. In addition, an IPMI-dedicated LAN, located next to LAN 1 on
the I/O panel, provides IPMI KVM support. All these ports accept RJ45 type cables.
(Note: Please refer to the LED Indicator Section for LAN LED information.)
Serial Port Header
A COM port header is located next to the DIMM memory P1-DIMMC1 slot on the
serverboard. COM1 provides serial connection support.
Unit Identifi er Button/UID LED
Indicators
A rear Unit Identifi er (JUIDB1) button
and a UID LED (UID_LED1) are located
next to the VGA port on the IO panel.
When you press the rear UID button,
rear UID LED will be turned on. Press
the UID button again to turn off the LED
indicator. The UID indicator provides
easy identifi cation of a system unit that
may be in need of service.
Note: UID can also be triggered via IPMI
on the serverboard. For more information
on IPMI, please refer to the IPMI user's
guide posted on our website at http://
www.supermicro.com .
UID Switch
(JUIDB1)
Pin# Defi nition
1 Ground
2 Ground
3 Button In
4 Ground
UID LED Status
(UID_LED1)
Color/State Status
Blue: On Unit Identifi ed
Chassis Intrusion
A Chassis Intrusion header is located
at JL1 on the serverboard. Attach an
appropriate cable from the chassis to
inform you of a chassis intrusion when
the chassis is opened.
Chassis Intrusion
(JL1)
Pin Defi nitions
Pin# Defi nition
1 Intrusion Input
2 Ground