Supermicro FatTwin F628G3-FT+, User Manual

Page: 116 / 160

7-10
FatTwin F628G3-FT+/FTPT+ User's Manual
Long Dur (Duration) Time Window
Use this item to set the time window value (in seconds) over which the TDP
(Thermal Design Point) should be maintained. The default setting is 1 , which
will allow the value to be automatically programed by the system.
Pkg (Package) Clmp (Clamping) Limit1
Use this item to set the limit on power performance states for the runtime
processor, with P0 being the state with the highest frequency (clock speed)
and power (consumption), and P1, a step lower in performance than P0, with
its frequency and voltage scaled back a notch. The options are Between P1/
P0 and Below P1 .
Short Dur (Duration) Pwr (Power) Limit En (Enable)
Select Enable to support Short Duration Power Limit (Power Limit 2). The
options are Enable and Disable.
Short Dur (Duration) Pwr (Power) Limit
This item displays the time period during which short duration power is
maintained. The default setting is 0 .
Pkg (Package) Clmp (Clamping) Lim2
Use this item to set the limit on power performance states for the processor
operating in turbo mode, with P0 being the state with the highest frequency
(clock speed) and power (consumption), and P1, a step lower in performance
than P0, with its frequency and voltage scaled back a notch. The options are
Between P1/P0 and Below P1 .

DRAM RAPL (Running Average Power Limit) Confi guration
DRAM RAPL (Running Average Power Limit) Baseline
Use this item to set the run-time power-limit baseline for DRAM modules.
The options are Disable, DRAM RAPL Mode 0, and DRAM RAPL Mode 1 .
Override BW_LIMIT_TF (BW_limit_tf )
This feature allows the user to turn off the "Override BW_Limit_TF (Time
Frame)" setting when the item--the "Running Average Power Limit for DRAM
modules" (DRAM RAPL) is set to Enabled so that the DRAM RAPL setting
can work properly. The default setting is 1 .