6-6
FatTwin F628G3-FT+/FTPT+ User's Manual
Figure 6-4: Removing a Dummy Drive from the Drive Carrier
Drive Carrier
Dummy Drive
1
2
1
2
Installing 3.5" Hard Drives into the Drive Carriers
The hard drives are mounted in drive carriers to simplify their installation and
removal from the chassis. These carriers also help promote proper airfl ow through
the drive bays.
Removing the Dummy Drive from the Drive Carrier
1. Remove the hard drive carrier from the chassis as described in the previous
section and lay the drive carrier on a fl at surface.
2. Remove the screws securing the dummy drive to the drive carrier.
3. Lift the dummy drive from the drive carrier.
Warning:
Except for short periods of time while swapping hard drives, do not operate
the server with the hard drive bays empty.
Summary of Contents for FatTwin F628G3-FT+
