Supermicro FatTwin F617H6-FTL+, User Manual

Page: 74 / 140

5-20
FatTwin F617H6-FTL+/FTPTL+ User's Manual
Ethernet Ports
Two Ethernet ports (LAN1, LAN2)
are located on the I/O front panel.
These Ethernet ports support 10G LAN
connections on the and X9DRFF-7TG+,
or the 1G LAN connections on the and
X9DRFF-7G+.
In addition, an IPMI LAN port is also
located on the front panel. All these
ports accept RJ45 cables. Please refer
to the LED Indicator Section for LAN LED
information.
Power Button/Unit Identifi er Switch
A Unit Identifier switch (SW1) and a
UID LED Indicator are located on the
serverboard. In addition, a power button
(PWR_SW1) is located next to the UID
switch on the front panel. When you
press the UID switch, the UID LED
Indicator will be turned on. Press the UID
switch again to turn off the UID LED. The
UID Indicator provides easy identifi cation
of a system unit that may be in need of
service.
Note: UID can also be triggered via IPMI
on the serverboard. For more information
on IPMI, please refer to the IPMI User's
Guide posted on our website @ http://
www.supermicro.com .
UID Switch (SW1)
Pin Defi nitions
Pin# Defi nition
1 Ground
2 Ground
3 Button In
4 Ground
UID LED (UID_LED1)
Status
Color/State OS Status
Blue: On Windows OS Unit Identifi ed
Blue:
Blinking Linux OS Unit Identifi ed
Power Switch
A power switch (PWR_SW1) is located
next to the VGA port on the motherboard.
Refer to the layout below for the location.