Supermicro FatTwin F617H6-FTL+, User Manual

Page: 91 / 140

Chapter 6: Advanced Chassis Setup
6-5
6-6 Installing and Removing Hard Drives
The F414IS chassis contains individual motherboards in separate 1U nodes. Each
motherboard node controls the hard drives contained within that node. Note that if
a node is pulled out of the chassis, the hard drives associated with that node will
power down as well. Refer to the charts below and on the following pages for your
specifi c chassis confi guration. These instructions apply to fi xed 3.5" hard drives.
Only enterprise level hard drives are recommended for use in Supermicro chassis.
F414IS-R1K62B Chassis Nodes and Their Hard Drives
Node 4
Controls twelve (12) 3.5" HDDs, optional two (2) 2.5" HDDs, D1-D15
Node 3
Controls twelve (12) 3.5" HDDs, optional two (2) 2.5" HDDs, C1-C15
Node 2
Controls twelve (12) 3.5" HDDs, optional two (2) 2.5" HDDs, B1-B15
Node 1
Controls twelve (12) 3.5" HDDs, optional two (2) 2.5" HDDs, A1-A15
Figure 6-3: Chassis Nodes and their Corresponding Motherboards
(Your chassis and drives may differ from those shown in this illustration)
Node 2
Node 4
Node 1
Node 3