Supermicro FatTwin F617H6-FTL+, User Manual

Page: 72 / 140

5-18
FatTwin F617H6-FTL+/FTPTL+ User's Manual
X9DRFF-7G+/7TG+ Quick Reference
Jumper Description Default Setting
JBT1 Clear CMOS See Section 5-9
JI
2
C1/JI
2
C2 SMB to PCI-E Slots Open (Disabled)
JPB1 BMC Enable Pins 1-2 (Enabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1 LAN1/LAN2 Enable Pins 1-2 (Enabled)
JPS1 SAS Enable Pins 1-2 (Enabled)
JWD1 Watch Dog Timer Enable Pins 1-2 (Reset)
Connector Description
FAN1-FAN8, Rear_FAN1 CPU/System/Cooling Fan Headers
HDD_PWR1/HDD_PWR2 8-pin Power Supply Connectors for HDD Device Use
I-SATA 0/1 SATA 3.0 Connectors 0/1 from Intel AHCI
I-SATA 2-7 SATA 2.0 Connectors 2/3/4/5 from Intel AHCI
JIPMB1 4-pin External BMC I 2 C Header (for IPMI Card)
JPI
2
C1 Power Supply SMBbus I
2
C Header
JPW1/JPW2 8-pin Power Connectors
JPW3 4-pin Power Connector
JSD1 SATA Device Power Connector
JTPM1 TPM (Trusted Platform Module)/Port 80 Connector
(J) USB2 Internal USB 2 Port
L-SAS 0-7 SAS Ports 0-7 from LSI 2308 SAS Controller
6-SGPIO 1/2 Serial Link General Purpose I/O Headers for SAS
T-SGPIO 1/2 Serial Link General Purpose I/O Headers for SATA
PWR_SW1 Power Switch (Button)
UID_SW1 UID (Unit Identifi er) Switch (SW1)
USB0/USB1 Front Panel USB 0/ USB1 Ports
LED Description State: Status
BMC_HB_LED1 BMC Heartbeat LED Blinking Green: BMC Normal
HDD_ACT LED1 HDD Activity LED Blinking Green: HDD Active
Failure_LED1 Failure LED
Blinking On: Power Failure; Blinking:
Fan Failure
LEDS2 SAS Heartbeat LED On (Green): SAS Normal
UID_LED1 UID LED On (Blue): Unit Identifi ed