NVR Software - SeeTec Surveillance
79
3. Define the maximum
Bandwidth
that is to be provided for the camera to
SeeTec server connection.
By default, the image stream is compressed to 4096 kbit/s.
Different settings for
Standard recording
and
Alarm recording
during MPEG-4 /
H.264 streaming can result in a several seconds delay when switching from
standard to alarm recording (this is camera-dependent). No recording takes place
during this period.
4. Change the settings for alarm recording only if you explicitly require a
different resolution or bit rate in case of an alarm and the loss of recorded
time is negligible.
Important
MPEG-4 / H.264 streaming is manufacturer-specific and is not
supported by all cameras.
The frame rate is not indicated on Panasonic cameras. To limit the
image stream, change the bandwidth setting in
Camera
configuration
>
Image storage
.
For a client side display of MPEG / H.264 streaming, the screen
saver must be disabled.
Always keep the video card drivers updated that are installed on the
client.
If the alarm recording values specified for
Resolution
,
Compression
,
I-Frame distance
or
Bandwidth
are different from
those of standard recording, then videostreaming must be re-
started. This can lead to a recording outage of at least one I-Frame
distance.
