NVR Software - SeeTec Surveillance
117
FTP
In an alarm scenario, you can also save a video or single image sequence of the
alarm recording on a FTP server along with sending an e-mail when the alarm ends.
1. Select the desired cameras in the
Transmit data from the following
cameras to the FTP server
field.
Selecting multiple cameras is possible.
2. In the
Data format
dropdown list, specify the data format of the export
(video or single image sequence).
3. Configure the FTP server and the data format (resolution, frame rate, length,
etc.) in the
Camera configuration
and the
SeeTec Administration
fields.
Note
There is an attempt to save data on FTP server once per minute in
case there are problems at FTP dispatch when alarm ends, e.g.
connection to FTP server cannot be established. After one hour, the
attempts stop and e-mail is discarded.
Client
Here you specify which alarms a certain user / group may see (
Persons involved
),
how alarms are displayed in the interface (
Visualization
), and whether messages
are sent to the client (
Message displayed
, only for alarms with medium or high
priority). In alarm event, you can play sound and run external application.
Note
Different sound files are executed for different priorities.
If you want individual sounds to be played for different alarms,
these files must be in WAV format. Copy the files on each client PC
into the
<SeeTec installation directory>\Client\sound
directory and
replace all existing standard sounds.
Note:
Your sound files must be renamed accordingly (
low.wav
,
medium.wav
and
high.wav
).
Adding involved persons
1. Click on
Edit
and select the users or groups that may see the alarm.
2. Confirm with
OK
.
