NVR Software - SeeTec client
41
4
NVR Software - SeeTec client
The SeeTec client is available as 32-bit version and 64-bit version. When the client
is installed on a 64-bit operating system, both client versions will be installed
always. The link in the start menu always connects to the 32-bit client.
1. To start the 64-bit version of the SeeTec client, double-click on the file
SeeTec 5.exe
in the
C:\Program Files\SeeTec
directory.
The 64-bit version of the SeeTec client is subject to some restrictions. A list with
these restrictions can be found here:
http://seetec.eu/fileadmin/01DL/manuals/seetec5_64Bit_Client_restrictions_EN.pdf
4.1
File menu
Surveillance Mode
,
Archive Mode
,
Report Mode
,
Configuration Mode
See chapter
General
(page 59).
Important
The following settings must be configured for each client and for
each Windows
®
login profile.
4.1.1
Language selection
1. In the
File
menu, select
Language selection
.
2. Select the desired language.
3. Click on
OK
.
The selected language will be used after the client is restarted.
4.1.2
Changing passwords
1. In the
File
menu, select
Change password
.
2. Enter your new
Password
.
3. Confirm your new
Password
.
4. Click on
OK
.
Note
You cannot change your password in
Configuration Mode
.
In Authorization Management, you can withdraw the user right to
change the password.
