Synway Information Engineering Co., Ltd
SMG Series Analog Gateway User Manual (Version 1.5.3)
Page 90
3.9.11 PING Test
Figure 3-106 Ping Test Interface
See Figure 3-106 for the Ping test interface. A Ping test can be initiated from the gateway on a
designated IP address to check the connection status between them. The table below explains
the configuration items shown in the above figure.
Item
Description
Source IP Address
Source IP address where the Ping test is initiated.
Destination Address
Destination IP address on which the Ping test is executed.
Ping Count
The number of times that the Ping test should be executed. Range of value: 1~100.
Package Length
Length of the data package used in the Ping test. Range of value: 56~1024 bytes.
Info
The information returned during the Ping test, helping you to learn the network
connection status between the gateway and the destination address.
After configuration, click
Start
to execute the Ping test; click
End
to terminate it immediately.
