Sunway SMG Series, User Manual

Page: 72 / 102

Synway Information Engineering Co., Ltd
SMG Series Analog Gateway User Manual (Version 1.5.3)
Page 67
Call Destination Port group to which the call will be routed.
After configuration, click Save to save the settings into the gateway or click Close to cancel the
settings.
See Figure 3-71 for the IP
Æ
Tel routing rule configuration interface after your configuration. There
is a rule displayed with Index 63 and Call Destination ‘Route by Number’, having no restriction on
Source IP, CallerID Prefix and CalleeID Prefix, which indicates the gateway will route a call from
any IP address to a corresponding port based on its number.
Press the Add New button on the bottom right corner of the list to add a new routing rule.
Figure 3-71 IP
Æ
Tel Routing Rule Configuration Interface
Click Modify in Figure 3-71 to modify a routing rule. The configuration items on the IP
Æ
Tel routing
rule modification interface are the same as those on the Add New Routing Rule (IP
Æ
Tel)
interface. Note that the item Index cannot be modified.
To delete a routing rule, check the checkbox before the corresponding index in Figure 3-71 and
click the
Delete button. Check All means to select all available items on the current page;
Uncheck All means to cancel all selections on the current page; Inverse means to uncheck the
selected items and check the unselected. To clear all routing rules at a time, click the Clear All
button in Figure 3-71.
See Figure 3-72 for the IP
Æ
Tel Routing Rule Configuration Interface under the Character mode.
You can edit the routing rule list to add a new one or modify an old one. The exact meaning of
each element of the rule is described on the page.
Figure 3-72 IP
Æ
Tel Routing Rule Configuration Interface (Character)