Sunway SMG Series User Manual Download

Page: 23 / 102

Synway Information Engineering Co., Ltd

SMG Series Analog Gateway User Manual (Version 1.5.3)

Page 18

Figure 3-10 Quick Config-Network Settings Interface

See Figure 3-11 for the Quick Config-SIP Settings interface. The configuration items on this
interface are the same as those on

the SIP interface. Refer to

3.4.1 SIP

for detailed settings. You

are required to fill with the information about the registrar if the gateway must be registered. After
configuration, click

Back

to go back to the Network Settings interface; click

Next

to enter the FXS

Settings interface.

Figure 3-11 Quick Config-SIP Settings Interface

See Figure 3-12 for the FXS Settings interface. The configuration items on this interface are the
same as those on the FXS interface. Refer to

3.6.1 FXS

for detailed settings. After configuration,

click

Back

to go back to the SIP Settings interface; click

Next

to enter the FXO Settings interface.

Summary of Contents for SMG Series







































































































Search results

Summary of Contents for SMG Series

Reviews:

Related manuals for SMG Series

Brands by name

Popular brands

Sunway SMG Series, User Manual

Search results

Summary of Contents for SMG Series

Reviews:

Related manuals for SMG Series

Brands by name

Popular brands