background image

                                                           

Synway Information Engineering Co., Ltd

 

SMG Series Analog Gateway User Manual (Version 1.5.3)       

                                     Page 41 

Figure 3-39 Ringing Scheme Modification Interface 

To delete a piece of ringing scheme, check the checkbox before the corresponding index in Figure 
3-38 a
nd click the ‘

Delete

’ button. 

Check All

 means to select all available items on the current 

page; 

Uncheck All

 means to cancel all selections on the current page; 

Inverse

 means to 

uncheck the selected items and check the unselected. To clear all ringing scheme at a time, click 
the 

Clear All

 button in Figure 3-38

3.5.7 Fax 

 

Figure 3-40 Fax Configuration Interface (Disable by default) 

See Figure 3-40 for the default fax mode configuration. The table below explains the items shown 
in the above figure. 

Item 

Description 

Fax Mode 

The real-time IP fax mode. The optional values are 

T.38

Pass-through

 and 

Disable

and the default value is 

Disable

 which means to disable both T.38 and 

Pass-through. 

See Figure 3-41 for the fax configuration under the T.38 mode. 

 

Figure 3-41 Fax Configuration Interface (T.38 Mode) 

Summary of Contents for SMG Series







































































































Reviews: