Sunway SMG Series User Manual Download

Page: 31 / 102

Synway Information Engineering Co., Ltd

SMG Series Analog Gateway User Manual (Version 1.5.3)

Page 26

Figure 3-22 SIP Server Interface

Click

Add New

to add SIP servers manually. See Figure 3-23. You can configure basic SIP server

information on this interface.

Figure 3-23 Add New SIP Server

All the items except Index and Description are the same as those on

the SIP

interface (

3.4.1 SIP

Item

Description

Index

The index of each SIP server. The gateway supports up to 8 SIP servers.

Description

More information about each SIP server, with the default value of

default

After configuration, click

Save

to save the above settings into the gateway or click

Cancel

cancel the settings. See Figure 3-24 for the SIP server management interface.

Figure 3-24 SIP Server Management

Click

Modify

in the above figure to modify the configuration of the SIP server. See Figure 3-25.

The configuration items on this interface are the same as those on the

Add New SIP Server

interface.

Summary of Contents for SMG Series







































































































Search results

Summary of Contents for SMG Series

Reviews:

Related manuals for SMG Series

Brands by name

Popular brands

Sunway SMG Series, User Manual

Search results

Summary of Contents for SMG Series

Reviews:

Related manuals for SMG Series

Brands by name

Popular brands