Sunway SMG Series User Manual Download

Page: 29 / 102

Synway Information Engineering Co., Ltd

SMG Series Analog Gateway User Manual (Version 1.5.3)

Page 24

Key

The key to encrypt the SIP signal.

RTP Encryption

Once this feature is enabled, you can encrypt the RTP package. By default it is

disabled

3.4.3 SIP Station

A SIP terminal can be registered to the gateway and becomes a SIP station. Enable the feature of
‘

SIP Station Supported

’ on

3.4.2 SIP Compatibility

interface, and you will see the item SIP

Station on the VoIP Settings menu. Click ‘

SIP Station

’ to go into the SIP Station interface. By

default, there is no available SIP station. See Figure 3-18 below.

Figure 3-18 SIP Station Setting Interface

Click

Add New

to add SIP stations manually. See Figure 3-19. You can configure basic SIP

station information on this interface. The bound port to a SIP station must be an FXO port and
unique. The username must be the same as that used to register the SIP terminal to the gateway.

Figure 3-19 Add New SIP Station

The table below explains the items shown above:

Item

Description

Number

The logical number for a SIP station to register to the gateway.

Summary of Contents for SMG Series







































































































Search results

Summary of Contents for SMG Series

Reviews:

Related manuals for SMG Series

Brands by name

Popular brands

Sunway SMG Series, User Manual

Search results

Summary of Contents for SMG Series

Reviews:

Related manuals for SMG Series

Brands by name

Popular brands