Synway Information Engineering Co., Ltd
SMG Series Analog Gateway User Manual (Version 1.5.3)
Page 29
3.4.6 Media
Figure 3-27 Media Settings Interface
See Figure 3-27 for the media settings interface where you can configure the RTP port and
payload type depending on your requirements. After configuration, click
Save
to save your
settings into the gateway or click
Reset
to restore the configurations. If a dialog box pops up after
you save your settings asking you to restart the service, do it immediately to apply the changes.
Refer to
for detailed instructions. The table below explains the items shown in
Item
Description
DTMF Transmit
Mode
Sets the transmit mode for the IP channel to send DTMF signals. The optional
values are
RFC2833
,
In-band
and
Signaling
, with the default value of
RFC2833
.
RFC2833 Payload
Payload of the RFC2833 formatted DTMF signals on the IP channel. Range of
value: 90~127, with the default value of 101.
