7.12 Date/Time (Clock)
After entering setup mode, select “Clock” and press to set or edit the date and time. If the
clock is set to off, a clock will not be displayed under measurement mode. The calibration time
of calibration records will also show “OFF” under calibration overview display.
Note: The transmitter is able to clock in action even if the power supply is cut off due to an
internal battery. If this fails, please replace the 3V CR2025 Li battery inside the transmitter.
Enter “RS-485 Communication” Setup
Press to confirm it.
Press or to set
the hour. Press to
proceed to adjust the
minute.
Press or to
adjust the month. Press
to proceed to adjust the date.
Press or to set
the year.
Press to confirm it.
Press to confirm it.
Press
or to turn
Clock on or off. If off, the
guide menu will proceed
directly to RS-485 setup.
Press to confirm it.
Press to confirm it.
31