Suntex PC-3110-RS, Operation Manual, Page: 22 / 68

6.2 Real-Time Chart mode
Real-time chart mode is for dynamic display of real-time graphics. The duration is about three
minutes of the recent changes in measured values of the curve. Users can set the mode to its
corresponding pH / ORP measuring range (see section 7.4). The smaller the range is set, the higher
resolution of the display is. When entering setup or calibration mode and returning to measurement
mode, the real-time graphic will be re-updated. When the measured value exceeds a set range of the
upper and lower limit, the graphics will be presented in the upper and lower limits dotted line. Real-time
chart mode display is shown as below. There are also real-time measurement value, & unit, and
temperature value & unit which are displayed in the bottom of the screen. The timeline in real-time
graphic is divided into 12 depict, which is describe the range of representatives of each of 1 / 4 minutes
(15 seconds).
15s
3 minutes of main measurement
record curve
Main measurement
value & unit
Temperature value & unit
The current
instantaneous value
Upper limit
Lower limit
18