Suntex PC-3110-RS, Operation Manual, Page: 10 / 68

2.3 Illustration of wall mounting and pipe mounting
Penetrate the two prepared holes in the rear
cover and fix the U-shaped pipe clip, and
then install two waterproof squeezed caps
(the transmitter’s standard accessory kit) into
the holes from inner rear cover to prevent
from the water vapor.
Installation of pipe mounting
Fixed with U-shaped pipe clamp.
(Optional, Order Number: 5333027)
Installation of wall mounting
Fixed with 4 x M4 screws
Sun Shield (Pipe mounting, Optional)
( Order No.: 8-35 + 8-35-3 + 8-35-1) Sun Shield (Wall mounting, Optional)
(Order No.: 8-35 + 8-35-3 + 8-35-2)
Insert the single hole rubber plug into
the unused cable gland, and tighten up
the cable gland to prevent from the
penetration of water vapor.
6