background image

WARNING:

 Do not use the monitor during magnetic resonance imaging (MRI) or in an MRI environment.

Cautions

The caution symbol indicates a potentially hazardous situation which may result in minor or moderate injury. 

It may also be used to alert against unsafe practices.

 

CAUTION:

  When downloading data from the monitor’s communications USB port, the device should not be 

in use with a patient.

CAUTION:

 Do not remove monitor covers, except to replace batteries. The monitor does not contain any user 

serviceable components. Return monitor if service is required.

CAUTION:

 Do not use on neonates, pediatric patients less than 3 years old, or patients known to be readily 

susceptible to bruising.

CAUTION:

 Do not use the monitor if it has failed its diagnostic self test, or if it displays a greater than zero 

pressure with no cuff attached.  The values displayed by such a monitor may be inaccurate.

CAUTION:

 Substitution of a component different from that supplied may result in measurement error. Re

-

pairs should be undertaken only by personnel trained or authorized by SunTech Medical.

CAUTION:

 The Oscar 2 does not contain any user serviceable internal parts and should only be repaired by 

an authorized SunTech Medical service representative. Do not service the product while in use.

CAUTION:

 If cuff fails to deflate within two and a half minutes, instruct patient on manual removal of cuff.

CAUTION:

 Check that operation of the monitor does not result in prolonged impairment of the circulation of 

the patient.

CAUTION:

 Remove batteries when device is not in use for long periods of time to prevent possible battery 

leakage and product damage.

CAUTION:

 A compressed or kinked connection hose may cause continuous cuff pressure resulting in blood 

flow interference and potentially harmful injury to the patient.

CAUTION:

 Using an incorrect cuff size could result in erroneous and misleading blood pressure measure

-

ment results.

CAUTION:

 Do not machine wash the cuff bladder.

CAUTION:

 On hypotensive patients, the device should be used with caution.

Contraindications

The Oscar 2 ABPM system should be used in conjunction with all other available medical histories and di

-

agnostic test information about the patient. The following are reasons to withhold use of the Oscar 2 ABPM 

Page 12 of 79

80-0062-00-RevL 2020-9-14

Summary of Contents for 99-0133-00
















































































Reviews: