6. Oscar 2 At a Glance
Device
1.
Start/Stop Button
To Power On:
Press the Start/Stop button.
To Power Off:
When not taking a reading, press and HOLD the Start/Stop button until you hear 8 beeps (approx. 5 seconds),
then release.
To Abort a Measurement:
Press the Start/Stop button any time during a reading.
To Start a Programmed ABP Study:
When time is flashing, press the Start/Stop button to take 1st reading.
To Start a Manual BP Reading:
When clock is displayed, press the Start/Stop button.
2.
Event Marker
3.
Day/Night Button
Display
4.
Time
- Shown when the monitor is not taking a reading.
5.
Battery
- Indicates low battery; REPLACE BATTERIES.
6.
Clock
- ABP study in progress.
7.
Sun
- Indicates AWAKE portion of study.
8.
Moon
- Indicates ASLEEP portion of the study.
9.
BP Reading
- During a reading, displays the pressure of the cuff in mmHg or kPa. Immediately after a reading,
shows the BP results in mmHg or kPa followed by heart rate in beats per minute.
10.
Readings Symbol
- Indicates number of BP readings in memory.
11.
Measurement unit
- indicates the unit of the displayed value in mmHg or kPa (blood pressure) or beats per
minute (heart rate)
Page 14 of 79
80-0062-00-RevL 2020-9-14
