NOTE: Install batteries before connecting Oscar 2 to PC via USB.
NOTE: Device will not re-charge batteries via USB connection.
CAUTION:
Remove batteries when device is not in use for long periods of time to prevent possible battery
leakage and product damage.
Installing AccuWin Pro 4
A more detailed installation guide is available in the AccuWin Pro 4 Quick Start Guide (82-0403-00).
PC System Requirements
•
Windows 10, 8 or 7 SP1 (32 or 64 bit)
•
SVGA or compatible display adapter and monitor. Minimum 1280 x 1024 recommended resolution
•
One available USB A port
•
Minimum 4GB of RAM
•
Minimum of 30GB of disk space for patient database
NOTE: Install AccuWin Pro 4 before connecting the USB cable to the computer.
1.
Connect the USB cable to the USB connector on the ABP monitor (Figure 1; part A).
2.
Connect the USB end of the cable to the USB port on your PC (Figure 1; part B).
Figure 1: Connecting the Oscar 2 to a PC
NOTE: The cable can be left connected when the PC is off and the monitor is not connected to a patient.
Communicating with the Oscar 2
To successfully complete an ambulatory blood pressure (ABP) study: Connect the Oscar 2 to the PC then
program the study in the downloaded application from your PC. When the patient returns you will again use
the application on your computer to retrieve the collected data.
Wireless Communications
The Oscar 2 may be equipped with an optional Bluetooth™ module, that will allow communications with wire
-
A
B
Page 16 of 79
80-0062-00-RevL 2020-9-14
