8-EN
INSTALLATION and OPERATION MANUAL
Evacuated tube collectors are mounted placing the manifold on the top and the rubber protectors in the
bottom part. Such collectors have vertical orientation.
Diagram 6
Collectors VTC type are mounted on specially designed support systems, adapted to different roof slopes.
and facade.
Diagram 7
5.1.
Flat roof VTC type collector installation
Diagram 8
Installation is carried out by at least two people.
We recommend consulting with a roofing expert.
Fix the support onto the roof as indicated in the Collector Support
Installation Instructions. Adjust the support angle as needed.
Onto the support stand mount the collector frame with manifold and
pipe holders. Fix the collector to support using the clamping clips. Make
sure all connections are properly secured and will not come loose under
harsh weather conditions.
Evacuated tubes are installed last, after the system has been connected
and tested for leakage.
