11-EN
INSTALLATION and OPERATION MANUAL
Step 5.
Carefully take evacuated
tube M out of the box. The upper
end of the tube with a silver probe-
like tip must fit inside its designated
nest on manifold, spread beforehand
with the heat-conductive paste (Е)
included in consignment kit. The
lower end of the tube must pass
through tube holder D. Place the
plastic protector on the bottom of
tube M. Carefully screw the
protector onto the holder.
Repeat this until you install all glass
evacuated tubes M.
Diagram 14
5. 3.
Installation of VTC type evacuated tube collectors on façade
Installation should be carried out by at least two people. We recommend consulting with a carrier wall
expert.
