65
P
Pa
arra
am
me
ette
err
D
De
essc
crriip
pttiio
on
n
Error limit (%)*
Adjustment accuracy
If the ratio of the difference between the active power
and the target value to the rated power is within the set
error range, the target value is reached.
Adjustment ratio (%)*
If the adjustment does not reach the set target value,
increase or decrease adjustment value according to the
set adjustment ratio, so as to reach the target value.
Control cycle
Time interval of delivering dispatching instructions
Parameter range: 5~60s
Note: *Only when the control method is set to "Closed-loop control", the parameter "-
Select energy meter / transformer" is settable.
Step 4
After finishing parameter setting, click "Save" to save the operation.
-- -- E
En
nd
d
10.3.1.3 Local Power Control
If active dispatching instruction or dispatching target value is used as dispatching input
locally, the active control mode is set to "Local power control".
Step 1
Click "Power control" -> "Active power" to enter the active power interface.
Step 2
Set the active control mode to "Local power control".
Step 3
Set local dispatching parameters. For specific parameter description, refer to the
following table.
User Manual