46
Step 5
Select “Custom” option in the “Configuration Method”. Click “Next” to enter
“Configure Measuring Point” the interface.
Table 9-2
Parameter description
P
Pa
arra
am
me
ette
err
D
De
essc
crriip
pttiio
on
n
Byte Order
Refer to the device Modbus map, parse the order of
the read byte stream
Beginning Address
The beginning address of the device
Quantity of Device
The number of the device
Debug Address
The device address to be read when click “Read-
Back”, the range is [(“Beginning Address”), (“-
Beginning Address” + ”Quantity of Device”-1)]
Read Type
With or without framing when send messages at this
point, recommend to choose continuous type
Coefficient
Refer to the Modbus map of the device, the
coefficient that multiplied the value
Read-back Value
The value of the selected measuring point read when
clicking "Read-back”
The user can select up to 13 objects for setting. For the corresponding
parameters(such as register address, register type, etc.), please refer to the
user manual of the connected meteo station.
Step 6
Select the points to be measured, click “Read-back” to read the information from the
meteo station in real-time to check the correctness of parameter setting.
Step 7
After confirming that the read-back data is correct, then click “Confirm”.
Step 8
Enter the template name in the pop-up prompt window and click “Confirm” on the
prompt window to save the template.
The template name should be a combination of numbers, letters, dashes and
underscores starting with English letters, with a maximum length of 32 bits.
Step 9
Click “Confirm” on the measuring point configuring window to add the device and
save the setting.
-- -- E
En
nd
d
9.8.1.9 Edit device
Step 1
Click "Device" -> "Device List" to enter the corresponding interface.
Step 2
Click the button
in the operation bar, to modify the name of the device connected to
the Logger1000 and other parameters.
User Manual
