SunFounder TS-10 Manual Download Page 82

Page: 82 / 213

SunFounder TS-10 10.1-inch Touch Screen

Install Cloud4RPi in Your Raspberry Pi

It is advisable to update your system before installing.

sudo apt update

sudo apt upgrade -y

Install/update the required packages.

sudo apt install git python3 python3-pip -y

Install Cloud4RPi with the following command:

sudo pip3 install cloud4rpi

Note:

This tutorial provides the installation method for Python 3.0 and above. For lower versions of Python, the

commands may need to be modified.

Login to Cloud4RPi on Your Computer

Open Chromium Web Browser and enter this link:

https://cloud4rpi.io

Before using it, you need to register and log in to your Cloud4RPi account.

Chapter 5. PROJECTS AND ACTIVITIES

Summary of Contents for TS-10






















































































































































































































Search results

Summary of Contents for TS-10

Reviews:

Related manuals for TS-10

Brands by name

Popular brands

SunFounder TS-10, Manual

Search results

Summary of Contents for TS-10

Reviews:

Related manuals for TS-10

Brands by name

Popular brands