SunFounder TS-10 Manual Download Page 151

Page: 151 / 213

SunFounder TS-10 10.1-inch Touch Screen

Or click

Binary Game

, and then learn online tutorial on the Scratch official website.

Required Components

• A Screen

• Scratch 3 (either online or offline)

You Will Learn

• Understand binary numbers.

• Convert binary numbers to decimal numbers.

Lesson Guide

Arrange a small binary abacus at the bottom of the screen.

First, we delete the previous sprite. Upload the

Zero.png

file and

Enter.png

file in the sprite list, you have downloaded

them from

github - 10.1-touch-screen

before.

Then we upload the

One.png

file in the

Costumes

option of the

Zero

sprite, so that the

Zero

sprite has

Zero

costume

and

One

costume.

Then we copy the

Zero

sprite with the right mouse button, and there will be 3 new

Zero

sprites in the stage area.

5.7. Scratch Projects

147

Summary of Contents for TS-10






















































































































































































































Search results

Summary of Contents for TS-10

Reviews:

Related manuals for TS-10

Brands by name

Popular brands

SunFounder TS-10, Manual

Search results

Summary of Contents for TS-10

Reviews:

Related manuals for TS-10

Brands by name

Popular brands