SunFounder TS-10, Manual

Page: 202 / 213

SunFounder TS-10 10.1-inch Touch Screen
Without a Screen
After the Raspberry Pi is connected to WIFI, we need to get the IP address of it. There are many ways to know the IP
address, and two of them are listed as follows.
1. Checking via the router
Check the addresses assigned to Raspberry Pi on the administration interface of the router.
The default hostname of the Raspberry Pi OS is raspberrypi. If you are using an ArchLinuxARM system, please find
alarmpi.
2. Network Segment Scanning
Network scanning applications can be used to look up the IP address of Raspberry Pi, such as Advanced IP Scanner.
Scan the IP range set, and the names of all connected devices will be displayed. The default hostname of the Raspberry
Pi OS is raspberrypi.
6.4 Use the SSH Remote Control
Bash is the standard default shell of Linux, and can be opened on the Raspberry Pi by using SSH. The Shell itself is a
program written in C programming language that acts as a bridge linking the customers and Unix/Linux systems.
For Linux or/Mac OS X Users
Go to Applications -> Utilities , find the Terminal , and open it.
198 Chapter 6. APPENDIX