LEG INSTALLATION
1
Remove packing and leg
assemblies from the carton
marked
LEG ASSEMBLIES.
Position leg assemblies in the
desired location. The leg
assemblies are in the shape of
a boomerang and should face
outward away from the wall
with support brackets facing
the middle. The legs should
be approximately 2 ½ feet
apart from each other and
equal distance away from the
wall (minimum 3”). (one
person can handle the lifting
and positioning of legs)
2
The “Power Box” should be
installed next. The power box
contains electrical components
that receive and distribute
power throughout the tanning
system. The power box rests
on the support brackets on
each leg and is secured to the
each leg assembly using #6
screws. This procedure will
allow the legs to be properly
positioned and ease the
installation of the base and
canopy (the installation of the
“Power Box” can be completed
by one person).
BASE INSTALLATION
3
Remove packing and unit from
box marked BASE UNIT. Lift
base into position (acrylic
facing up). The bolts should
protrude the holes of the
mounting bracket in the leg
assemblies.
The base is secured to the leg
assemblies using four (4) 1/4”
nut and washer combinations
(the “Base” can be easily
installed by two individuals).
