4) To observe the current value of a parameter, press the
START/STOP
button.
The Display will show a number with a period in the lower center of the
display. The numbers will be flashing. The number shown is the current
value for that parameter (see illustration
A
).
For Lamp Hours, Session Counts, etc. the value displayed can be as high
as 9999. To display this value, the timer will flash two numbers-three
times, then two numbers-three times, pause, two numbers-three times,
two numbers-three times, pause, etc. For example, if you are checking
lamp hours (Parameter 6) and the display flashes the numbers 53 three
times, then 14 three times, pauses then repeats, then the total lamp hours
stored in the particular timer is 5314.
5) Press the
UP
or
DOWN
button to change the parameter to the desired
value.
If you want to clear the value for that parameter, press the
UP
and
DOWN
buttons at the same time until the display changes and appears similar to
illustration B.
ILLUSTRATION B
