TIMER USER’S GUIDE
This tanning system is equipped with a digital timer that has the T-MAX
®
communication protocols built in. The timer will allow the tanning system to
operate in stand-alone mode or be placed on a digital timer network.
In addition the timer also supports wireless technology. An AP900 OEM wireless
module will be required to place the tanning system o n the wireless network.
The timer also allows the tanning system to be compatible with most third-party
controllers that support contact closure operational configurations.
CONFIGURATION
Setting Parameters
1) Apply power to the Tanning System
2) Press and hold the
START/STOP
and
UP
buttons at the same time on the
timer until the display changes and appears similar to illustration
A
. The keys
should be kept pressed down for about 5 -6 seconds. Release the buttons
once the display changes.
ILLUSTRATION A
3) Press the
UP
or
DOWN
Button until the parameter
number that you want is
displayed (see list of
parameters on page 2).