PACKAGING
The ta nning system is shipped in three separate boxes. The type of assembly in
each box is labeled on the outside. The box containing the tanning system legs
is placed on top, followed by the box containing the base and then the box
containing the canopy. The tanning system should be unpacked and assembled
in this order. For additional installation instructions consult the “ASSEMBLY”
section of this manual.
CONTENTS OF EACH BOX
LEG BOX:
•
Two (2) legs
•
Owner’s manual
•
Assembly hardware
o
Canopy
§
Four (4) 5/16 hex washer nuts, to secure canopy to the leg (PN
0022003209)
§
Four (4) 5/16 Nylock nut (PN 0022003249)
§
Four (4) ¼ flat washer (PN 0028003265)
o
Base
§
Four (4) ¼-20 HEX nuts used to secure the base to the legs (PN
0022003212)
§
Four (4) Flat ¼ washers used with above nuts
o
Power Box
§
Four (4) Phillips screws, to be used to secure ”Power Box” to the legs
and (PN 0024003092)
o
Middle Façade
§
Four (4) Philip screws used to secure middle façade to leg assembly (PN
0048003608)
o
Front Façade
§
Two Phillips truss-head ¼-20 screws used to secure front façade to the
tanning system (PN 0020003041)
BASE BOX:
•
Base of tanning system
•
Power box
•
Middle façade
CANOPY BOX:
•
Top of tanning system
•
Front façade
