ASSEMBLY
ASSEMBLY
To avoid personal injury and or damage to the tanning system, it is
recommended that the tanning system be assembled by a minimum of two
persons.
All electrical connections inside the tanning system should be completed by a Certified
Electrician or a Factory Authorized Representative. Connection to electrical service
should only be made by a Certified Electrician.
All wiring and connections should
conform to local and national electrical codes.
To protect the tanning system components (acrylic, paint, etc.) from superficial
damage during assembly or service, place a soft non-abrasive material over the
tanning system and or over the area in proximity where the work is being
performed.
TOOLS REQUIRED FOR ASSEMBLY:
The following is a list of tools required for installation:
Standard screw driver (
_
)
Phillips screw driver (
+
)
Standard and Stubby
1/2” and 7/16” deep well socket
and ratchet combination
