FILLING
D E L U X E / D E L U X E
PLUS
SEMI DELUXE
ECONOMY
F2
2P
0
0
X
2P
0
X
2P
Filling
When the power supply reaches the water inlet valve during the fi lling or water inlet
phase, if after 6 min. the water level micro-switch does not close the contact, this
means that the electronic module has not detected the fi lling signal. The dishwasher
will stop and the buzzer will sound as follows:
2 beeps
pause 7 sec.
2 beeps
pause 7 sec. ..... and so on successi-
vely.
This indicates error code F2.
Possible causes:
1-No water is entering
2-Mechanical system of water level unit defective.
3-Water level micro switch defective.
4-
Defective
installation:
- Wires from micro switch to card are defective
(broken).
- Incorrect crimping of connector to cable, J3 contacts 1
and
4.
- Connector not making proper contact with card tracks.
5.
Card
defective.
The fl ow diagram below shows the sequence for analysing and discovering dishwas-
her fi lling anomalies.
Description of all Functions
20