3.2.1 - Interpretation and analysis of failure codes
Door open or not properly closed
DOOR OPEN OR NOT PRO-
PERLY CLOSED
D E L U X E / D E L U X E
PLUS
SEMI DELUXE
ECONOMY
F1
1P
X
0
X
1P
X
0
1P
The dishwasher detects the door being opened during washing, or the incorrect func-
tioning of the door lock system.
If it detects that the door is open during the washing phase, after 1 second the pro-
gram will stop at whichever phase it is at and the buzzer will sound as follows:
1 beep
pause 7 sec.
1 beep
pause 7 sec.………and so on succes-
sively.
This indicates error code F1.
Possible causes:
1. Door not properly closed.
2. Mechanical or electrical defect in the door micro-switch. An electrical brid-
ge should be made to analyse the defect.
3. Defective installation:
- Wires from door micro-switch to card are defective (broken).
- Connector badly mounted on cable,
J3 CONTACTS 1 and 9
.
- Connector not making proper contact with card tracks.
Warning:
THE CONNECTION DELAY is not a defect, it is
a SAFETY DEVICE.
If the door is opened during the wash phase, to prevent the cold air entering from
producing anomalies inside the dishwasher, when it is closed again the dishwasher
will stop for a certain time, depending on the water temperature.
If the water temperature is lower than 45º, it will stop for 5 seconds.
If the water temperature is 45º or higher, it will stop for 3.5 minutes.
Description of all Functions
!
18
