Description of all Functions
IN CASE OF MALFUNCTIONING OR ANOMALY (for all models)
In case of malfunctioning or anomaly, the dishwasher’s automatic information buzzer
will help us to identify the cause of the problem.
It emits a series of intermittent beeps followed by a pause of approximately 7 se-
conds. The intermittent beeping will then repeat, followed by the pause. It will then
repeat again, and so on.
The number of intermittent beeps will vary depending on the type of malfunction or
anomaly.
Example:
1 beep
pause 7 sec. 1 beep pause 7 sec.…….. = F1 door open
2 beeps
pause 7 sec. 2 beeps pause 7 sec.……….= F2 fi lling defect
.
.
.
9 beeps
pause 7 sec. 9 beeps pause 7 sec.………= F9 alternative motor fault
Inside the door there is a help table for matching the error code emitted by the dis-
hwasher with the part affected.
The beeping will stop when the START-PAUSE button is pressed. However the signal
will be stored in the memory, and so if the start-pause button is pressed again the
corresponding number of beeps - i.e. the error code - will be emitted again.
This operation may be carried out as many times as you wish.
For models with DISPLAY
On models with a display, the error beep code is the same, but the error will also be
shown digitally on the display (F1 to F9).
12