STANDARD VERSION
The economy range dishwashers do not have a wash phase indicator or display, and
any anomalies or malfunctions are therefore indicated by means of the Functioning
and End pilot lights and the number of beeps emitted.
Using this data, the anomaly can be identifi ed from the following table:
SAFETY DEVICE
FAILURE CRITERION
ACTION
TO STOP
SAFETY DE-
VICE
ECO INDICATIONS
LOP pilot
END pilot
Nº beeps
DOOR OPEN
1 sec with program selected,
door open and on.
Wait
Press
ON/OFF
Flashing
Off
1
CONNECTION DELAY
When door is closed:
- if Temp < 45ºC, 5 sec.
- if Temp > 45ºC, 3.5 min.
C o n n e c t
when delay
time has elap-
sed
FILLING
EV on 6 min. + MN off
(empty)
Stop
Press
ON/OFF
Off
Flashing
2
DRAINING
EB on 2 min. + MN on (full)
Stop
Press
ON/OFF
Flashing
Flashing
3
OVERFLOW
MNS on (full) and door closed
for 10 sec.
Stop
Press
ON/OFF
Flashing
Flashing
4
OVERHEATING
Temp > 77ºC
Stop
Press
ON/OFF
Flashing
Flashing
5
NOT HEATING UP
B > 5ºC/10min
Stop
Press
ON/OFF
Flashing
Flashing
6
NTC
NTC open or short circuited
Stop
Press
ON/OFF
Flashing
Flashing
7
WATER PRESSURE LOW
MPR off detected on heating.
Stop
Press
ON/OFF
Flashing
Flashing
8
MOTOR
DISTRIBUTOR
No change detected in cam
state for 12 sec.
Stop
Press
ON/OFF
Flashing
Flashing
9
O= Off X = Flashing
B = Temperature rise slope on heating.
(fi rst data taken 2 min. after start of heating ).
Important:
As an equivalent to the deluxe range feature, the
nº of beeps corresponds to the number following the letter F:
2 beeps = F2, 3 beeps = F3, and so on.
Important for all versions:
If the dishwasher is switched off at the master switch, all the
information will be lost.
Description of all Functions
I
I
16
