5
SAFETY PRECAUTIONS FOR YOUR
SUNBEAM FOOD PROCESSOR LC7600C.
• Always use extreme care when handling
processing blades and cutting discs. These
are extremely sharp and may cause injury if
handled incorrectly. Always store processing
blades and cutting discs in their respective
covers or processing containers.
• Unplug from power outlet when not in use,
before putting on or taking off attachments,
and before cleaning.
• Do not put hot liquids into the food
processor bowl or blender. Warm liquids
only.
• Avoid contacting moving parts at all times.
• Place the processor bowl onto the base of
the processor before fitting any attachments.
• All blades and attachments should be
removed with care before cleaning.
• Do not overfill the processor.
• Do not process for longer than the time
periods recommended in the operating
chart.
• Always remove the blade before emptying
the processor bowl of its contents.
• Do not operate for more than 2 minutes at a
time when processing heavy loads. None of
the recipes in this manual are considered a
heavy load.
Important instructions – retain for
future use.
Sunbeam’s Safety Precautions
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
5
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
Sunbeam’s Safety Precautions
SAFETY PRECAUTIONS FOR YOUR
SUNBEAM FOOD PROCESSOR LC7600C.
• Always use extreme care when handling
processing blades and cutting discs. These
are extremely sharp and may cause injury if
handled incorrectly. Always store processing
blades and cutting discs in their respective
covers or processing containers.
• Unplug from power outlet when not in use,
before putting on or taking off attachments,
and before cleaning.
• Do not put hot liquids into the food processing
bowl. Allow ingredients to cool to room
temperature before placing in processing bowl.
• Avoid contacting moving parts at all times.
• Place the processing bowl onto the base of the
processor before fitting any attachments.
• All blades and attachments should be removed
with care before cleaning.
• Do no overfill the processor.
• Do not process for longer than the time periods
recommended in the operating chart.
• Always remove the blade before emptying the
processing bowl of its contents.
• Do not operate for more than 2 minutes at a
time when processing heavy loads. None of
the recipes in this manual are considered a
heavy load.
Summary of Contents for Oskar LC7600C
Page 2: ......
