Sunbeam Oskar LC7600C, Instruction Booklet

Page: 10 / 36

10
Important: If the processing bowl and cover
are not correctly assembled, the Oskar™
Professional will not function.
Using your Oskar™ Professional
1. Plug the power cord into a 230-240V AC
power outlet and turn the power ‘ON’.
2. Using the On/Off button on the control
panel, press once to start processing.
The Pulse function remains on as long as the
Pulse button is pressed down.
Further ingredients can also be added while
processing by pouring through the feed tube
once the food pusher has been removed.
3. After you have completed processing, press
the On/Off button to stop processing.
Note: For maximum control when using your
food processor, before turning on your food
processor load the feed tube. Always use the
food pusher for more evenly processed foods
and never use your fingers.
Important: The Oskar™ Professional is fitted
with a safety thermal cut-out device and
will shut off in the event of overload. If this
occurs, switch the appliance off and it will
automatically reset when cool.
Using your Sunbeam Oskar™ Professional continued
11
Note:
All attachments must be firmly
attached to the spindle. Always adjust the
attachments until you are sure that they are
correctly fitted.
Placing the spindle
1. Fit the spindle onto the drive shaft,
see figure 4.
Universal ‘s’ blade
1. Fit the processing bowl and spindle as
detailed previously in figures 1, 2 & 4.
2. Remove the universal 's' blade from the
storage drawer.
3. Fit the universal ‘s’ blade over the spindle
and press firmly into place, see figure 5.
Warning:
Use caution, as blades are sharp.
Always handle the universal ‘s’ blade by its
central plastic section.
4. Place food into the processing bowl.
5. Fit the processing cover to the processing
bowl, see figure 3 and place the food
pusher in the feed tube.
6. Plug the power cord into a 230-240V AC
power outlet and turn the power ‘ON’.
7. Start processing using the On/Off or Pulse
buttons.
8. When processing is complete, remove the
spindle and blade from the processing bowl
before removing the processed food.
Fitting/using the tools on your
Oskar
™
Professional
Fig 4
Fig 5
Using your Sunbeam Oskar
®
Professional continued
Using your Oskar ® Professional
Note: For maximum control, load the feed tube
before turning on your food processor. Always
use the food pusher formore evenly processed
foods and never use your fingers.
Important: The Oskar ® Professional is fitted
with a safety thermal cut-out device and
will shut off in the even of overload. If this
occurs, switch the appliance off and it will
automatically reset when cool.
Oskar ®