64
Sun Blade T6340 Server Module Installation and Administration Guide • April 2010
scsi-initiator-id
0 to 15
7
SCSI ID of the serial attached SCSI
controller.
oem-logo
No default
oem-logo?
true, false
false
If true, use custom OEM logo.
Otherwise, use the server
manufacturer’s logo.
oem-banner
No default
oem-banner?
true, false
false
If true, use custom OEM banner.
ansi-terminal?
true, false
true
If
true
, enable ANSI terminal emulation.
screen-#columns
0-n
80
Sets number of columns on screen.
screen-#rows
0-n
34
Sets number of rows on screen.
ttya-mode
9600,8,n,1,-
9600,8,n,1,-
TTYA port (baud rate, bits, parity, stop,
handshake). The serial management port
only works at the default values.
output-device
virtual-
console,
screen, rscreen
virtual-
console
Power-on output device.
input-device
virtual-
console,
keyboard,
rkeyboard
virtual-
console
Power-on input device.
auto-boot-on-error?
true, false
false
If
true
, boots automatically after system
error.
load-base
0-n
16384
Address.
auto-boot?
true, false
true
If
true
, boots automatically after power on
or reset.
network-boot-arguments:
Arguments to be used by the PROM for
network booting. Defaults to an empty
string.
network-boot-arguments
can be
used to specify the boot protocol
(RARP/DHCP) to be used and a range of
system knowledge to be used in the process.
For more information, see the
eeprom
(1M)
man page or your Solaris reference manual..
boot-command
boot
boot
Executed if
auto-boot?
is true
boot-device
disk, net,
cdrom
disk, net
Device from which to boot.
multipath-boot?
true, false
false
TABLE 4-1
OpenBoot Configuration Variables Stored on the Service Processor
Variable Name
Possible Values
Default Value
Description