22
Sun Blade T6340 Server Module Installation and Administration Guide • April 2010
5. View the IP address that DHCP has assigned to the server module SP.
After a valid IP address has been assigned to the server module, view the IP
address, as described in
Step 3
.
▼
To View or Configure the IP Address for the Server
Module SP Using Static IP Addresses — Through the
CMM
1. Attach to the CMM using the CMM serial or Ethernet port.
2. (Optional) View the IP address.
■
To see all the IP address-related information, type:
■
To see only the IP address, type:
3. Navigate to
/CH/BL
n
/SP/network
by typing the following command:
4. Type one of the following commands:
■
To configure a static Ethernet configuration:
Where
xxx.xxx.xx.xx, yyy.yyy.yyy.y
and
zzz.zzz.zz.zzz
are the IP address,
netmask, and gateway for your ILOM and network configuration. To
determine these addresses, contact your system administrator.
■
To revert to a dynamic Ethernet configuration:
->
show /CH/BL
n
/SP/network
->
show /CH/BL
n
/SP/network ipaddress
->
cd /CH/BL
n
/SP/network
->
set pendingipdiscovery=static
->
set pendingipaddress=
xxx.xxx.xx.xx
->
set pendingipnetmask=
yyy.yyy.yyy.y
->
set pendingipgateway=
zzz.zzz.zz.zzz
->
set commitpending=true