16
Sun Blade T6340 Server Module Installation and Administration Guide • April 2010
FIGURE 2-4
Web Interface Log Out Confirmation Screen
Connecting to the Server Module SP Through the Chassis
CMM Serial Connector
You can access the CMM ILOM by connecting a terminal or a terminal emulator to
the RJ-45 serial port on the chassis. Once the server module is installed in the
modular system chassis, you can connect to the server module SP by using the CLI
on the CMM ILOM software.
▼
To Connect Through the Chassis Serial Connector
1. Verify that your terminal, laptop, or terminal server is operational.
2. Configure the terminal device or terminal emulation software to use the
settings.
■
8N1: eight data bits, no parity, one stop bit
■
9600 baud (default, can be set to any standard rate up to 57600)
■
Disable hardware flow control (CTS/RTS)
3. Connect a serial cable from the serial port (SER MGT) on the chassis to a
terminal device.
Refer to the modular system chassis documentation for the location of the serial
port.
