Chapter 2
Installation and Configuration
11
FIGURE 2-1
Inserting the Server Module Into the Chassis
7. Push the server module into the slot until the module is about 1.5 cm (one-half
inch) from
the chassis front.
See box 2 in
FIGURE 2-1
.
8. Push the ejectors down until they snap into place.
The server module is now flush with the modular system and the ejectors are
locked. See boxes 3 and 4 in
FIGURE 2-1
.
The server module goes into standby mode and the ILOM service processor
initializes as soon as you insert the server module into the chassis.
