30
Sun Blade T6340 Server Module Installation and Administration Guide • April 2010
2. Connect the monitor power cord to an AC outlet.
3. Connect the USB keyboard cable to one USB connector on the cable dongle.
4. Connect the USB mouse cable to the other USB connector.
5. Access the
ok
prompt.
For more information, see
“To Obtain the
ok
Prompt” on page 62
.
6. Set the OpenBoot configuration variables.
From the existing system console, type:
7. To cause the changes to take effect, type:
The system stores the parameter changes, and boots automatically when the
OpenBoot configuration variable
auto-boot?
is set to
true
(the default value).
Note –
To cause the parameter changes to take effect, you can also power cycle the
system using the front panel Power button.
You can now issue system commands and view system messages using your local
graphics monitor. Continue with your installation or diagnostic procedure, as
needed.
For more information about graphics configurations, see Appendix B of the
Sun
Blade T6340 Server Module Service Manual,
820-3902.
Changing the ILOM Password
1. At the initial login prompt on the server module SP, log in using the default
administrator user name and password:
2. Use the ILOM password command to change the password.
ok
setenv input-device keyboard
ok
setenv output-device screen
ok
reset-all
hostname
login:
root
Password:
changeme