18
Sun Blade T6340 Server Module Installation and Administration Guide • April 2010
You are now connected to the CMM ILOM software CLI.
6. Navigate to the server module ILOM by typing:
Where
n
is an integer (0 – 11) that identifies the target server module by the
chassis slot that the server module is installed in.
7. Type the
start
command
.
A prompt is displayed.
8. Type
y
to continue or
n
to cancel.
After you type
y
, the ILOM software running on the server module SP prompts
for the password specific to that server module SP.
Note –
The CMM ILOM logs on to the server module ILOM using the user name in
the
user
target under
/CH/BL
n
/SP/cli
(where
n
is the slot where the server
module is installed).
9. Type the password when prompted.
The default password is
changeme
.
The server module ILOM prompt is displayed.
See
“Changing the ILOM Password” on page 30
for information about changing
the default password.
10. When you are done, type
exit
.
The server module ILOM exits and the CMM CLI prompt is displayed.
The following display shows an example of the login screen:
->
-> cd
/CH/BL
n
/SP/cli
