Sun Oracle SPARC T3-2, Service Manual

Page: 47 / 222

Detecting and Managing Faults 35
Service-Related ILOM Command Summary
The following table describes the ILOM shell commands most frequently used when
performing service related tasks.
faults/0 | |
/SP/faultmgmt/0/ | chassis_serial_number | **********
faults/0 | |
/SP/faultmgmt/0/ | product_serial_number | **********
faults/0 | |
/SP/faultmgmt/0/ | fru_serial_number | *******-**********
faults/0 | |
/SP/faultmgmt/0/ | fru_part_number | 541-3857-07
faults/0 | |
/SP/faultmgmt/0/ | mod-version | 1.16
faults/0 | |
/SP/faultmgmt/0/ | mod-name | eft
faults/0 | |
/SP/faultmgmt/0/ | fault_diagnosis | /HOST
faults/0 | |
/SP/faultmgmt/0/ | severity | Major
faults/0 | |
TABLE:
Service-Related ILOM Commands
ILOM Command Description
help
[command] Displays a list of all available commands
with syntax and descriptions. Specifying a
command name as an option displays help
for that command.
set /HOST send_break_action=break
Takes the host server from the OS to either
kmdb
or break menu, depending on the mode
Solaris software was booted.
set
fru|component
clear_fault_action=true
Clears the fault state for the FRU or the
component.
start /HOST/console
Connects you to the host system.
show /HOST/console/history
Displays the contents of the system’s console
buffer.
set /HOST/bootmode property = value
[where property is
state
,
config
, or
script
]
Controls the host server OpenBoot PROM
firmware method of booting.
stop /SYS
Powers off the host server.